How would you guys and girls set-up the 700xx for this track.
This is a great motocross track and going to race it in 2011.
http://www.youtube.com/watch?v=87hwcAAiAlY

:D

Baxter does the track have practice days? I would take her out let her tell you what she can a cant handle and go from there! by the way you brits have nicely groomed tracks!!

going to be interesting to follow your season...

This track is groomed to perfection. It is Ireland so a ferry is needed.
This is way better than we have in the UK.
Thats why I want to do this race.
It's a kinda US track in Ireland. :D

Baxter does the track have practice days? I would take her out let her tell you what she can a cant handle and go from there! by the way you brits have nicely groomed tracks!!

going to be interesting to follow your season...

2011 is going to be real busy , with alot more work.:yay:

Nice track. Camera person needs to get himself a tripod, was getting dizzy with all of his shaking.

yeah made my tummy upset :)

umm 18/19 moto tires, drop the ride height to about 7" off the ground, take about add just a little more camber to front tires, fox evol gen 2 shocks in front so you can dial in body roll in the corners and take your pick of shocks for the rear....if cheap add sway bar....and 13 tooth sproket with big three, looks like you could say in 3rd most of the track that way....of course this is if money is no object

umm 18/19 moto tires, drop the ride height to about 7" off the ground, take about add just a little more camber to front tires, fox evol gen 2 shocks in front so you can dial in body roll in the corners and take your pick of shocks for the rear....if cheap add sway bar....and 13 tooth sproket with big three, looks like you could say in 3rd most of the track that way....of course this is if money is no object

Trying to get the 18" rears. I need a picture of the importer in bed with a goat to get these. Only ones produced are Maxxis and BKT.
The Fox evol gen 2 I am struggling with as Fox is selling the Gen 1 cheap.
The money , I would have to be nice to the Wife !:D

by the gen 2 shocks baxter you wont regret it only 4 more weeks till i get my podium x rears

Trying to get the 18" rears. I need a picture of the importer in bed with a goat to get these. Only ones produced are Maxxis and BKT.
The Fox evol gen 2 I am struggling with as Fox is selling the Gen 1 cheap.
The money , I would have to be nice to the Wife !:D

You can get a ITP MXR4 in 19" for a 10" rear wheel.......good tyre too.

i heard there where problems with the fox gen 2? something to do with the air expansion in the chambers since they are air over oil.. they heat up and they get stiffer so they don't stay consistent, but than again i could be wrong,:ohno: i would go with Elka's

You can get a ITP MXR4 in 19" for a 10" rear wheel.......good tyre too.
Do they still make these tyres ?
Looked at ITP website and they are not listed but still get them on Ebay.
This is a nice compromise as I feel the 18 are to small.
Cheers Ace ! you got me thinkin .:D

Do they still make these tyres ?
Looked at ITP website and they are not listed but still get them on Ebay.
This is a nice compromise as I feel the 18 are to small.
Cheers Ace ! you got me thinkin .:D

Yeah they still have them but are listed under the MXR6.......Check the bottom of the page in the link below.

http://www.itptires.com/sportatv/holeshot_mxr6.html

Nice track. Camera person needs to get himself a tripod, was getting dizzy with all of his shaking.
just all the beer you drank Joe!

i have had no problems with my fox shocks