|
aschuck 02-07-2009, 10:01 PM Can someone tell me the best way to drain the radiator? I'm adding the Temp sensor for my Vapor. Is there a drain bolt or do I take off the lower hose? A picture would be great.:hey: My manual is one the way, but doesn’t do me any good in the mail. Thank’s Alex vfm2010 02-07-2009, 11:24 PM Without looking, I would guess there might be a drain on the bottom of the water pump. I'll check it out in the morning. aschuck 02-07-2009, 11:52 PM Thank's I appreciate it! smo0oth1 02-08-2009, 08:50 AM The simplest way is to just pull the lower hose and drain it all in a bucket to reuse. Dave01 02-08-2009, 03:24 PM You can cut the hose without fluid running out. I installed mine and only got a little on the ground. I used a pair of the PVC cutters that look like pliers and it cut real easy. http://img.photobucket.com/albums/v235/gsxr1255/P1010238.jpg aschuck 02-08-2009, 08:50 PM Thank's guys it's done. wasn't to bad. Dave01 where did you conect the power and grounds, right to the battery? Thanks Alex Dave01 02-09-2009, 12:31 AM Thank's guys it's done. wasn't to bad. Dave01 where did you conect the power and grounds, right to the battery? Thanks Alex Alex, I went right to the battery to make sure I got a good ground and a full 12 volts. aschuck 02-09-2009, 09:17 AM That's what I thought. Thank's Chrisj 02-09-2009, 06:48 PM How did all you guys wire the RPM sensor. What value did you set your trailtech at? aschuck 02-09-2009, 07:42 PM Good question! I wraped it around the spark plug wire about 6 times. I haven't set it up yet. I would like to know the value also. | |