baldydaz
02-11-2009, 01:39 PM
hi guys.
i've just fitted some 10" douglas wheels to the xx. apparently they were old stock to fit the old can ams. (4x143). all it took was to drill the holes out to 11mm. no spacers needed, clearance is good and they look trick. i'll post pics on friday
bye bye from the UK
Sonic
02-11-2009, 03:34 PM
What to the wheels do the the ATV width?
Be sure the lower a-arm doesn't make contact with the wheel when fully compressed.
ChrisXuereb
09-24-2009, 11:18 AM
Just purchased a set. I had seen a pic of the 700 on ebay. Don't know if it's the same one though! I got the same wheels 4 x 143 tough I wish I could have chosen a different offset. They're +6 -3 so they really make the bike wide. Would have preffered a +5 -4 offset. Getting some road tyres now. Just replaced the rear shocks with a set of Polairs Outlaw KTM FOX Shocks. They're kinda shorter so the bike rides lower and still have room to make it higher if desired + it was a cheap option off ebay! Do you have some pics? Will post some when ready
OzLinc
09-24-2009, 07:24 PM
I've always wondered about DWT rear 10" wheels for an Outlaw IRS. Offset is more like the stock 700XX 11" but you would need to drill a new bolt pattern as they are 4/110.
5W0P3
09-27-2009, 10:47 PM
Where's the pictures!?!?!?
Baxter
09-30-2009, 07:03 PM
A +6 will make the rear approx 50" wide.
scuzz
09-30-2009, 08:26 PM
A +6 will make the rear approx 50" wide.
50" wide on a trail quad = liberal use of reverse.
700xx crazy
09-30-2009, 08:35 PM
Dang no trail ridin in Tennessee!!!!!
5W0P3
09-30-2009, 08:38 PM
A +6 will make the rear approx 50" wide.
I think it only makes it 4" wider on each side. Where you coming up with 6?
scuzz
09-30-2009, 08:50 PM
Dang no trail ridin in Tennessee!!!!!
Wah?
5W0P3
09-30-2009, 08:52 PM
Wah?
Yeah, I would think Tennessee was full of trails!
scuzz
09-30-2009, 08:54 PM
I think he may have been referring to trails wider than 50".