Honda TRX700XX Forum - Club700XX banner
1 - 12 of 12 Posts

·
Registered
Joined
·
355 Posts
Discussion Starter · #1 · (Edited)
I was wondering who went with 10s and how they fit and perform. I know it can be done. Rocky Mountain sells the rims. I'm thinking going with Razrs or Holeshots 20x11x10 rear tires on 10s in the back and 21x7s up front. I want a machine that is as versatile as possible. I want to ride desert, occassional MX and technical stuff. There really isn't any mud where I ride. I realize there will be compomises. What does everyone think?
 

·
Premium Member
Joined
·
2,728 Posts
There are quite a few members that are running 10" rims and they like them since you have a better selection of tires. With those rims, the wheelbase is wider about 1" on each side and you need to remove the mud scraper. If it wasn't for my trailer's width size, I would have purchase some 10" rims.
Now some of the boys are using them mainly for Dune riding.
If you do a "search" with a 4 letter word..."rims" you'll find a whole bunch of post.
 

·
Premium Member
Joined
·
2,932 Posts
There is an abundant amount of information in the tire/suspension section. Look a few pages back and you will find everything you need to know.
 

·
Premium Member
Joined
·
2,189 Posts
I run 10's with rzr2s, 22'' tires, and they are great. The ITP's aren't the strongest, but they wont break your wallet either. I have several sets, and use them for racing XC, and they work fine. I just bought a set of the BAJA fronts, see how they go and hope they come out with something like that for the back.
 

·
Premium Member
Joined
·
2,728 Posts
What's the actual size of the rim and offset that you are using?
 

·
Premium Member
Joined
·
2,189 Posts
IDK if you were directing your question to me Joe, but here you go.

www.itptires.com/honda_trx700xx_product_update.htm

4/144 ITP .190 T-9 Pro Series Wheel 10X7 4.0 + 3.0 Polished4/144 ITP .190 T-9 Pro Series Wheel 10X7 4.0 + 3.0 Polishe

If you go to Rockymountain, just look for the T-9 for our quad, it only comes in front or back and only polished. $66 is what they charge you which is pretty decent. I tried to post a direct link to where you order the wheels, but for some reason it redirects you.

ITP also makes a 12" wheel by the looks, but Im a fraid that may be harder to find tires for too, but I am not sure as I never had to look for them before.
 

·
Registered
Joined
·
45 Posts
How does the back end slide with the 10's on??
 

·
Premium Member
Joined
·
2,189 Posts
with the RZR 2s, it doesn't slide much unless you lean far forward, but it also depends on the surface you ride on. I go from running MX on a 450 that is built up and light as hell, to this, and it takes about 2 turns to realize im on a different beast, and then I am fine. They are a little wider, but I can't really notice.
 

·
Premium Member
Joined
·
2,728 Posts
IDK if you were directing your question to me Joe, but here you go.

www.itptires.com/honda_trx700xx_product_update.htm

4/144 ITP .190 T-9 Pro Series Wheel 10X7 4.0 + 3.0 Polished4/144 ITP .190 T-9 Pro Series Wheel 10X7 4.0 + 3.0 Polishe

If you go to Rockymountain, just look for the T-9 for our quad, it only comes in front or back and only polished. $66 is what they charge you which is pretty decent. I tried to post a direct link to where you order the wheels, but for some reason it redirects you.

ITP also makes a 12" wheel by the looks, but Im a fraid that may be harder to find tires for too, but I am not sure as I never had to look for them before.
Thanks Chuck, just wanted the info so other members could see it so if they decide to up for 10" then they would know what to order.
 

·
Registered
Joined
·
579 Posts
I too am running 10" with Razor2 22" front & rear .. I love mine.. It is a tad wider & I can barely squeeze through sides of trailer, but what the hell?
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top