[Redline700xx]

Thinking about getting a couple new parts. 11to1 piston and a stage 3 cam. Just wondering if you can run a stage 3 without changing anything else? Also should this setup run on pump gas? What kind of gains should I see? Have EHS Big 3 already. Thanks for the help guys...

 

[08700xx]

Yeah you can run that setup without changing anything else. You'll be fine to run that setup with 91 octane or higher (pump gas) I am going to guess you'll see about 3-4HP adding the HC3 and the 11:1 piston.

 

[jfdanie2]

Your programming will need to be changed on your fuel controller for the cam.

 

[08700xx]

Your programming will need to be changed on your fuel controller for the cam.

Eric from EHS will be able to tell you what to do with that but Im sure it will be adding 1/2-1 more fuel with the + button (just my guess, ask Eric to be sure)

 

[xx700xx]

I forget the settings but I would guess they are close to the ones I have at home. You'll feel a real nice boost in power. I was on a stock piston with just hc3 in my sand dunes vid and my most recent against the yellow raptor

 

[TRX700XX]

I have a pretty good dobeck map for that setup.... msg me for it