[VelociRaptor]

34x ci
302 based build
hyd roller cam
ported Edelbrock Victor JR cylinder heads(by me 8 years ago for a 408 ci build)
27lbs of boost

 

[VelociRaptor]

Its a fairly fresh build and was taken easy on the dyno for a rough tune. As you can see its still climbing at 6500rpm cut off. Probably will make another 200ish HP/100ish TQ.
Ran 8.8x @ 15x mph on a shake down run with a 2.0x 60ft lol.

 

[boost addict]

Its a fairly fresh build and was taken easy on the dyno for a rough tune. As you can see its still climbing at 6500rpm cut off. Probably will make another 200ish HP/100ish TQ.
Ran 8.8x @ 15x mph on a shake down run with a 2.0x 60ft lol.

He should pull a 1.3 60ft with some drag slicks, and have some air between the front tires and the track. Sweet build!

 

[VelociRaptor]

Yeah, I told him by my calculator it should be a 1.3ish 60ft which would make it an 8 flat or better ET. BTW, its on E85.

 

[boost addict]

Yeah, I told him by my calculator it should be a 1.3ish 60ft which would make it an 8 flat or better ET. BTW, its on E85.

One or two carbs? That's fast for 2.85 a gallon lol.

 

[VelociRaptor]

FI, it was carbed but swapped over.

 

[boost addict]

Happy B-day Bo! Getting close to the big 40:lol:

 

[boost addict]

FI, it was carbed but swapped over.

That's some Big injectors he is running! I have 60lb injectors in mine lol.

 

[VelociRaptor]

He told me what size they were, dont remember, 120+ I know for sure lol.

 

[VelociRaptor]

Happy B-day Bo! Getting close to the big 40:lol:

Close but no cigar, thanx!

 

[VelociRaptor]

Also, its through a heavy TH400.

 

[boost addict]

He told me what size they were, dont remember, 120+ I know for sure lol.

That's crazy lol. Up here he wound need a roll cage and a parachute:lol:

 

[VelociRaptor]

He does.