Honda TRX700XX Forum - Club700XX banner
1 - 7 of 7 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
k, so i just installed the 13t, and now i'm trying to adjust my chain but i can't get the bolt loose, has anyone else had this problem and any suggestions on how to fix? When i loosen the main bolt the other side moves as well and i'm doing this on my own so it makes it a pain in the ass :cry:
 

·
Registered
Joined
·
1,294 Posts
Put a wrench on the other side and hold it while you turn the nut
 

·
Registered
Joined
·
24 Posts
Discussion Starter · #3 ·
that wasn't happening either, it was on super tight, sprayed it with some pb blaster and then lodged the other wrench in the rear a-arm thing and stepped on it, that busted it free
 

·
Super Moderator
Joined
·
5,864 Posts
I had to use the a big 1/2" drive ratchet. I dont think a 3/8" would do w/out a cheater pipe. Let the wrench slide into the frame and it will hold it's self.
 

·
Super Moderator
Joined
·
5,864 Posts
The way I read the manual says 65 ft. lbs. I'd say mine was more like 120+ No way it was only 65. And I put some arse behind it too, when I re-tighten!
 
1 - 7 of 7 Posts
Top