[mmarine2]

I bought a 700xx, the guy decides to cut the top of the air box open for more air to pass through, when revving the gas it boggs out a little bit. I was wondering if this is due to too much air coming through and was wondering if i should get another lid ? Its all stock. Much help would be appreciated!

 

[MadMav]

That wont cause the bog problem. I would cover and seal the hole, or put Outerwear over it. To much dirt will get in and require premature filter cleaning.

Mav

 

[M_Quick]

If you have the cash get the EHS lid.

http://www.ehsracing.com/products/trx700xx_airbox_EHS.htm

 

[boost addict]

I made my own for 13.00 $

 

[mmarine2]

Any idea what would be causing the bog issue

 

[boost addict]

What air filter are you using? Has it been cleaned recently? Removing the lid or opening it up should make it run better not worse.

 

[mmarine2]

Its a uni filter

 

[jfdanie2]

Clogged fuel filter or injector maybe.

 

[M_Quick]

plug check?

 

[mmarine2]

the things legit brand new with about 50 hours . it might just be a fouled spark plug. any idea on how to get the spark plug off? thanks guys

 

[M_Quick]

The plug boot is harder to get off, "in one piece" than the plug is to remove. I used the spark plug tool in the tool pouch under the seat. What problem are you having, locating or removing plug?