[traitor08]

I just had a honda atc90 given to me. Its in fair shape but doesn't run. Pulled the motor out and I am gonna have the frame blasted and repainted, and fenders redone. My friend paints tractors so I am calling in a favor. The motors topend is gonna be taken apart and inspectedthen either fixed or just put it back together if alls good. I believe the atc90 has the right to being first atc made, I may be wrong, haven't researched them.

 

[EEHonda]

Cool, what year? I have a 78, with fiberglass rear fenders. Make sure the valves are in good shape. Just a little leakage and they are a pain to start.

 

[traitor08]

I have no idea what year. I know it has next to no compression, at least what I am used to any way. It has fiberglass fenders, it has some homemad hubs on it for a different bolt pattern. It has 3 stripes on the tank. Anyway to tell years?

 

[EEHonda]

If the sticker is gone, Honda should be able to tell you from the serial #s.

 

[traitor08]

What I think is cool is the hi/low tranny, in the 70's. It would be kind of cool for the xx to have, lows for technical, highs for kicking-you know.

 

[scrawny]

there are vin searches specifically for the ATC's just google!

 

[EEHonda]

​

there are vin searches specifically for the ATC's just google!

Cool, nice tip!

 

[scrawny]

i was hoping search results would be super specific, it will only give year make and model which is good enough for most lol

 

[Simplyorange]

i picked up a atc 200s sunday for $50 from a friend, we used to ride it when we were kids, 2 years ago he rebuilt the top end then it sat up for a year, yesterday we cleaned the carb, adjusted the ignition a little and it cranked on first pull and we also used an old 400ex nose to make a front fender for it. today we are retrofitting a set of 400ex rear fenders onto it .after the plastics are on im going to make a custom fiberglass seat pan and then we are going to foam it and wrap it and ride the piss out of it.

 

[traitor08]

I am gonna sell this one. Me and a friend have a project we wanna do with yamaha frame