Honda TRX700XX Forum - Club700XX banner
1 - 1 of 1 Posts

·
Registered
Joined
·
109 Posts
So I recently purchased the control bumper from PRM (http://prm-atv.com/MN.asp?pg=products&specific=1856&from=115) and it doesn't fit with my exhaust. I have the FMF 4.1 full exhaust (It is bent up just a hair from someone hitting me). Anyway, when you try to put the bumper on, the exhaust wont be able to go up to it's rear mount, other wise it will hit the bottom of the "Baja" bar. Now I am sure you can jerry rig something up with the exhaust so that it hangs lower, but I don't really want to do that as they have it at the angle for a reason (matching up with the other pipe, no angles in it, better flow, which if bent a little down it wouldn't be). The bar itself looks awesome, is light weight, and looks like it would offer lots of protection, just the darn fitment probmel with the pipe. In the picture, they have it on the machine w/ a stock pipe, which is relatively shorter than mine. I am a little bummed....:disgust:

I appreciate the info.
 
1 - 1 of 1 Posts
Top