Joined
·
221 Posts
what size chain this thing have? I really dont know ... and am gonna replace mine with something a bit more attractive i think.
chain size
1 - 13 of 13 Posts
Joined
·
221 Posts
dont know the length but its a 520. More attractive chain? I hope you dont mean those butt ugly colored chains.......yuck.hno:
nah ... id pick up tsubaki gold chain ... im so anti OEM
Joined
·
6 Posts
tsubaki makes a good chain, go for it.
Joined
·
6,389 Posts
Truer words were never spoken for you. Shocks, bumper, nerfs, muffler, rims...and the list goes on...
Joined
·
29 Posts
k i just found out the chain size its a 520x70
front sprocket is a 14t
rear sprocket is a 37t
front sprocket is a 14t
rear sprocket is a 37t
Joined
·
6,389 Posts
Wilson, just an FYI...but the 700XX and the 450r share the same front sprocket...same part number and all. (It may save you time if you're ordering one from somewhere)
Joined
·
29 Posts
k i didnt know that i was just giving the info for the chain size and since i was on that page the sprockets where also
Joined
·
221 Posts
wow ..so means 70 links right? thats not including the attachment link? Im not totally understanding of the way they size/fit chains.
I took a good look at the sprockets ...the front sprocket is a much easier replacement than the rear ... can get to it from the right side of the quad ... compared to taking the entire rear end off/apart to get to the rear one.
I took a good look at the sprockets ...the front sprocket is a much easier replacement than the rear ... can get to it from the right side of the quad ... compared to taking the entire rear end off/apart to get to the rear one.
Joined
·
102 Posts
actually ive found that certain oem products are actually better than aftermarket. On many quads the stock clutch is the only way to go and sometimes the brake pads. Also oem chains and sprockets are REALLY good. Ive always got the most use out of OEM sprockets compared to aftermarket. they just last longer.
Joined
·
221 Posts
ty for your experience. I decided to stick with oem chain/sprockets for the time being. I was just thinking to experiment with an added tooth ... or even taking one away.
I did however put some ASV c5 levers on my quad and do like them.
I did however put some ASV c5 levers on my quad and do like them.
1 - 13 of 13 Posts
