Honda TRX700XX Forum - Club700XX banner
1 - 20 of 20 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
I bought a new 700xx awhile back while working out west, bought it pretty cheap was not happy with the performance seemed to be lacking power in my opinion, took it to the dunes 1 time wasnt happy. Called CT talked to Allen said he had not done a 700xx yet but he had done plenty of xr650 said he was game. Told him i wanted the most he could give me but i wanted it reliable. That is exactly what he gave me , Ported head , installed + 2mm intake + 1mm exhaust, 11;1 piston, web cam, springs, CT Sonic full exhaust, PC5 programmer & dyno tuned it. made a little over 60 hp is very smooth & quiet till you jump on the throttle. If you are looking for some reliable HP then you can call Allen at CT.:D
 

·
Registered
Joined
·
671 Posts
do you have a email address for him do you mind me asking how much it cost you
Here is CT's website:

www.ctracing.com

My 250r has a CT Racing 330 kit on it. I have always been happy with the service I have recieved from CT.

Doug
 

·
Registered
Joined
·
626 Posts
i have spoke to ct racing they said it was not a one off build can do them when ever people want told me it made well over 60hp(rear wheel) on pump gas he was happy they way it turned out also has the exhaust in stock for $539.95
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #5 ·
I never said or implied it was a 1 off build hense the post, saying call him if you want reliable HP. I am sure he could get more hp if you wanted but watch what you wish for, in the open dunes it great, in some tight trails& woods in MO it is more than you you can control is some cases. The HP #s are with a stock air filter & a Web 492/89a cam on 93 octane fuel.
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #7 ·
You will have to talk to Allen at CT I am not sure what he is going to charge to do it I will call & talk to him about it. I basicly droped my bike off & he played with it for a while he cut me some breaks on labor for having it so long it did turn out very nice.
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #9 ·
Ill se what I can do, as I am working at Hoover & the quad is in St Louis.
If I have some they would have header wrap on it,
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #14 ·
no it was not free, & I have tried several times to post pics no luck will try & have a buddy help next week when I see him, I talked to Allen think if you droped off a bone stock bike as I did you are looking in the $2000 to $2500 range depending on what you want done. best to call Allen.
 

·
Premium Member
Joined
·
4,835 Posts
Hi Scott3B,
Bumpin ya because I would like pics of the CT exhaust. If you have trouble posting them , then I will send you my email address.
Tried emailling CT and they never answered.
 

·
Premium Member
Joined
·
2,189 Posts
Lee,

Did you try [email protected]? I emailed them a few weeks ago on a friends 450r, and they got back to me in 2 days.
 

·
Registered
Joined
·
2,293 Posts
i heard that allen built my 96 400ex and it screamed and it was reliable and he will also answer your calls or emails , he does great head work also there is so many good builders out on the west coast, they are few and far between in my neck of the woods
 

·
Registered
Joined
·
671 Posts
I would like pics of the CT exhaust.
Baxter, I ordered a CT exhaust today. Once I get it I will post up some pics.

Doug
 
1 - 20 of 20 Posts
Top