Honda TRX700XX Forum - Club700XX banner

1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hi all, Great to see the forum is still going strong after all these years, it’s always my first port of call before working on the quad.
Has anyone else had issues in removing the front sprocket from the shaft, I’ve never had this happen before on any of my Honda motorcycles but this time no amount of tapping with a drift and hammer would shift it.
In the end I had to buy a 3 legged puller to remove it.. that did the trick.
I must admit it’s been on for a few years but was surprised to find it stuck on the splines.
 

Attachments

·
Registered
2007 TRX450ER
Joined
·
223 Posts
Try PB Blaster.
 

·
Registered
Joined
·
223 Posts
Did the splines on the shaft look good after pulling it off...was it just very rusty? I haven't had that issue myself, but I've only changed it once so far.
 
1 - 3 of 3 Posts
Top