Honda TRX700XX Forum - Club700XX banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
708 Posts
are those pics with it at TDC? if so and you do have it lined up correctly your hub is oriented wrong at least the way the pics look. the hot cam was keyed seems like so it seems like it would be hard to screw that up but i would check that out.

also holly silcon batman you just need a little of that stuff i personally use copper coat for most things but silicon is fine you just do not want gobbs inside your motor like that when they fall off they will plug stuff up. you want a fine like fine maybe .010 bead coming out the side not gewbbers. dont worry everybody does it but its wrong lol

if thats not it it cantbe much your either hitting a rocker to somting it wasnt supposed to or the valve is hitting the piston due to wrong timing setting. your rockers look fine if you didnt take them out of cover then you didnt mix them up so its probably your timing make sure hub is indexed correctly
 

·
Premium Member
Joined
·
708 Posts
Yea it's at tdc in the pic and I dOnt get it really. Like u said u gotta have hub right because it's keyed and I didn't take rockers out at all. So don't understand it. I've rotated and checked timIng several times.
if the hubs on right then did you put the bolts that hold the sprocket in the wrong holes? the cam needs to be facing correctly like the pics baxter put up.
 
1 - 3 of 3 Posts
Top