Honda TRX700XX Forum - Club700XX banner
1 - 2 of 2 Posts

·
Registered
Joined
·
340 Posts
Front Bar

Mate, I presume you mean the bolt heads are rounded and the threads are ok, the front bumbers are worth nothing, get the angle grinder out cut the bolt heads off, then get some vice grips and get the threaded end out. I suppose you could stuff around with easy outs but just hack the bar up and throw it away.

Man sorry if this sounds over the top but the bars are worthless. I dont mean to be a smart arse but make sure your undoing them the right way. Mine came straight out. Sounds like Honda might have put some lock tight on em.
 

·
Registered
Joined
·
340 Posts
Boys my way is aggresive but you get the bar off in 5min flat, this way is good if you dont care about the stock bar.

My mate hit a tree bent two bolts and the mounting tabs. He stuffed around for hours trying to save the bar, while his nice new Moto Active bar was there smilling at him. He admitted defeat gave the job to me. I had his bar fitted in less than 15min. I got to admit the stock bar was in 4 peaces when I finished.
 
1 - 2 of 2 Posts
Top