[vikkers]

Hi just fitted my Houser front A Arms and Fox Evo shocks
I just wanted some feedback on the settings for the A Arms in respect what do you guys feel the best camber settings are i dialed mine in to have 2 degrees negative camber what if any castor you run i know its easily changable with the sli cast option
also for those that run the 23 inch front wheels which is what im doing when the tyres arrive what suspension settings you guys run
the fox shocks came from the factory with 50 in the main and 200 in the evol
my ride height with standard wheels tyres ws 7 and 3/4 inches front and back
im also running the fox podiums in the rear as well
what ride height are you guys running
im doing cross country racing and trails but no big rocks just through woods

all input most appreciated

also as well as main and evol chamber settings what about clicks on rebound and compression etc

im a moderate rider in the racing and weigh 240 pounds

thanks

 

[Baxter]

I have used this a guide line for a long time for the 450r and it seems to work.
http://www.lsracing.com/img/Guide_21.pdf , This should help.
I am runnning Teixeira Tech and it seems easier with these a-arms.
I like Eds idea of keeping it simple.

 

[boost addict]

vikkers... I weight the same as you. I run 60 in the main and 220 in the evol. The rear podiums were setup great for my weight out of the box(250lb springs marroon color)

 

[vikkers]

Hi Baxter, Boost Addict
thanks for the input i will have a play and amend the settings in the evols i think i lso have the maroon springs but my ride height with them at the rear measured at foot peg was 8 inches
ive just put on the 23 inch tyres a new brand in the uk called bxt they are a identical copy to the razor 2 but a little bit cheaper and easily available
so my question is boost addict what ride height you running in the front and the rear
thanks alot