[Brokenbones]

I started my bike with those and found it more noisy than before. Can it be the titanium retainer that amplify the ticking noise? And my valve adjuted btw.

 

[Brokenbones]

My valves are adjusted by the way.

 

[DL700]

spin the motor over by hand and look for a loose spot on the adjustment, readjust valves at that spot

 

[Brokenbones]

? Don't you just align the marks (cam and crank)?

 

[Brokenbones]

.006 intake and .008 exhaust I do this when engine is cold is that ok?

 

[EHSRACING]

you have more sping pressure with the new springs so they will be louder they are closing harder add that with a more aggressive ramp in the cam it makes them noisy. I generally adjust them when it gets put together then run for a few then readjust when its the motor is warm but not ripping hot.

 

[Brokenbones]

I readjusted them when the was warm: intake .004 and exhaust .008 now it is more quiet. Thank you