Honda TRX700XX Forum - Club700XX banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
4,835 Posts
If the fronts are 10" then there shouldn't be a problem .(check Ebay)
The rears I would get the OMF fixing tabs that come with regular OMF covers and make something similar to original OMF ones but outta plastic or ali.
 

·
Premium Member
Joined
·
4,835 Posts
first of all, as asked before, are you going for "somewhat effective yet easily removable" or "super effective and practically semi-perminant"?

Thats going to be a big difference in my ideas
Post them all up. I'd like to know also.:D
 

·
Premium Member
Joined
·
4,835 Posts
1. Spray the rim with a heavy coat of PAM.

2. Tape cardboard over the face of rim.

3. Cut a small hole in cardboard.

4. Insert tip of expanding foam in hole and fill.

5. Wait 5min and remove cardboard.

6. Spraypaint foam black for bling effect

7. Race quad

Please do not try this ! I am ordering a set of the same rims for the rear and I will send you my version of mudplugs for the 11" rears.

SmoOoth1 stick to motors !!!!:disgust:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top