Honda TRX700XX Forum - Club700XX banner
1 - 3 of 3 Posts

·
Registered
Joined
·
671 Posts
I still need to figure something out for the fronts.
Douglas actually makes mud plugs. I have a few of the "Champion in a Box" sets with beadlocks all around for my 450R's and it includes mud plugs for all four wheels. I would think those front mud plugs would work with your front wheels, unless your front beadlock rings are way different then the new wheels. Measure the inside diameter of your front beadlock rings and I will compare to mine. If they are close you should be able to get the mudplugs from Douglas.

Doug
 

·
Registered
Joined
·
671 Posts
Here are a couple of pics. They just "press" in, the plastic rings hold them in place. The inside opening measures 8" on my beadlock rings. If yours are close to that these should work.

Doug
 

Attachments

·
Registered
Joined
·
671 Posts
my wheels are 10". good pictures though
These wheels are 10" also. I am talking about the inside diameter of the beadlock ring being 8". Look at the pic with the tape measure. Where the end of the tape measure is to the same location on the other side is 8", so basically the mud plug diameter is 8".

Or are you trying to say the inside diameter of your beadlock ring is 10"? If that is the case, these will not even be close to fitting.

Doug
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top