Honda TRX700XX Forum - Club700XX banner
1 - 20 of 32 Posts

·
Registered
Joined
·
172 Posts
Discussion Starter · #1 ·
I will buy a pro-taper handlebar soon, but i dont know how to relocate my dash light.

So i dont want the trail tech clamps, cause i want to install the pro taper foam


thanks


ps: also, some1 know what's the stock handle bar bend (hight)?
 

·
Premium Member
Joined
·
1,790 Posts

is this what you ment. are your talking about this kind of bar pad cause it fit fine.
 

·
Registered
Joined
·
392 Posts
I'm interested in how you did this, I have pro taper bars with a big foam thing in the center,, i tucked my dash lights underneather for now but they are not visible during riding. If my bike is going to overheat or sum shit i would like to know b4 its seizes up not after lol
 

·
Premium Member
Joined
·
1,790 Posts
i have protaper evo bars and that is the trail tech bar clamp it comes with the dash light mounts and my bar pad went right over it think i cout out a little bit of foam was it.
 

·
Registered
Joined
·
392 Posts
Yep.... you lost me:confused:
 

·
Premium Member
Joined
·
1,790 Posts
what bar clamp do you have i bought the trail tech clamp which has the assembly to hold the engine lights. it was $79 on RM
 

·
Registered
Joined
·
392 Posts
Oh I have the stock bar clamp.
 

·
Premium Member
Joined
·
1,790 Posts
oh ok gotcha ur stock light bezel wont fit with your bar pad. i went to the fat bars so i needed a new clamp. i dont think it will work for stock size bars.
 

·
Registered
Joined
·
172 Posts
Discussion Starter · #10 ·
Yes, 1 1/8 pro taper contour!!!!

so i dont want to payd 50$ more for clamps with light dash!!!!

:(
 

·
Registered
Joined
·
392 Posts
Yea i put them on, but they are under the foam pad and you cannot see them.
 

·
Premium Member
Joined
·
1,790 Posts
Yes, 1 1/8 pro taper contour!!!!

so i dont want to payd 50$ more for clamps with light dash!!!!

:(
well you have to buy different clamps and most are more than $50 and dont have a spot for the lights. trail tech looks the cleanest to me as far as relocating the lights.
 

·
Registered
Joined
·
89 Posts
there is a guy on here that just mounted the stock dash under the hood with valcro so it comes off easy, i'll try to find it, also some people make holes in the front plastic and put them inside but then you have to take them out everytime you take off you plastic
 

·
Premium Member
Joined
·
1,790 Posts
I think i found what i want:)

http://www.trailtech.net/030-SHC01-COVER.html

It's juste the replacement plastic, it's sure i can fit it on other clamps:)
umm??? that exactly what in my picture.lol it has some bends in it to fit to the trail tech clamp. and i guess im confused because you said you didnt want to spend much money. the trail tech clamp that comes with that piece is $78, houser clamps are $85 +7, roxx $90+7, percision $229+7...and so on. i dont know of any way to do it cheaper. and if you find a set of clamps for around $40-50 its worth it to spend the little extra and have it fit right just my 2 cents
 
1 - 20 of 32 Posts
Top