Honda TRX700XX Forum - Club700XX banner
1 - 12 of 12 Posts

·
Registered
Joined
·
367 Posts
Discussion Starter · #4 ·
prob gonna think I am crazy, however.

the way I have it in there.

The exhaust side looks like a deeper cutout; however, the intake side is DEFINATELY a wider cutout.
 

·
Registered
Joined
·
367 Posts
Discussion Starter · #7 · (Edited)




Is this a problem....... The thing is on there perfect but but the top gold piece is upderneath slightly.

Is this a problem? The bottom is completely clear however.
 

·
Premium Member
Joined
·
708 Posts
no as long as you lined it up right it ok, on head where the dowel pins are on the same side you can flip flop them but the timing chain hole wont line up. its pretty hard to put a xx on wrong if you have the pins in
 

·
Registered
Joined
·
367 Posts
Discussion Starter · #9 ·
What about the cylender head cover eric.

Will liquid gasket stuff from like an autoparts store work? Rated for like 700 degrees lol
 

·
Premium Member
Joined
·
1,073 Posts
Red high temp rtv is what I used
 
1 - 12 of 12 Posts
Top