Honda TRX700XX Forum - Club700XX banner
1 - 1 of 1 Posts

·
Registered
Joined
·
223 Posts
I bought an inner tube from Tractor Supply (doesnt matter what it fits) and cut it up into strips which I glued with contact cement to the skid plate. I only put the strips where the skid contacts the frame and I left a few open areas so that water can drain out easily. This helped the vibration some. My worst vibrations are coming through the PRM side bars, I drilled some small holes at each end and filled with silicone. This made it more livable.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top