Honda TRX700XX Forum - Club700XX banner
1 - 2 of 2 Posts

· Registered
Joined
·
672 Posts
Yes, the tank will still need a vent. I think you could do it, would have to use the setup Clarke uses to seal the receiver to the tank:

http://www.clarkemfg.com/cart/index.php?main_page=product_info&cPath=15&products_id=135

The backing ring goes into the tank, then the cork gasket goes on the outside between the tank and receiver, tighten the bolts down to hold the receiver in place. I have a spare gasket laying around so I took it out to my stock tank, looks like it would work to me. Just need to use the gasket as a template to cut out the middle and drill the screw holes. Doesn't look to hard, as long as the mounting area on the tank is perfectly flat, which it looks like it is. I may just try it myself one of these days.

Although I bet the sytem Ceballos posted would probably work just as well, especially if you already have the 5 gallon jugs.

Doug
 

· Registered
Joined
·
672 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top