Honda TRX700XX Forum - Club700XX banner
1 - 6 of 6 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Just got the 22/10/11 razr's for the rear and wondering what everybody is running in them for presure?
 

·
Premium Member
Joined
·
2,728 Posts
Just got the 22/10/11 razr's for the rear and wondering what everybody is running in them for presure?
@ my weight 200 lbs, run @ 6 psi
 

·
Registered
Joined
·
136 Posts
I would say minimum 5 psi or if you like to jump and ride hard surfaces up to 9.5 psi. It can feel like a better ride with them soft but over the rough they will fight against the shocks.
I usually run 8.5 psi on the rear and 11 psi up front. If the pressures are too high it causes rider fatigue!
 

·
Registered
Joined
·
551 Posts
Well I run 5.5 psi in the rear (razr) and 6 in the fronts (razr2) and I weight 235 lbs seems to get good traction for me.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #6 ·
I thought maybe it should be a little higher with bias instead of radials. ITP says to run 8 in the holeshots I have on the front and they are bias, Thanks for the help
 
1 - 6 of 6 Posts
Top