Honda TRX700XX Forum - Club700XX banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Ok so I recently put 24" Kenda Baer Claws and 23" Kenda Kutters on my 700. Defintely need to do some re-gearing. Was hoping to only have to redo the front sprocket but Im not sure what size I need for more low end torque. Im guessing a 13 tooth.

Also do I need a new chain when doing this?
 

·
Registered
Joined
·
258 Posts
no new chain needed if you feel liek you need a chin replace it i run the 13t and i love it
 

·
Registered
Joined
·
231 Posts
Yep a 13t will help with the low end grunt. I run stock tires and couldn't be happier with it. It helped on the trails so you don't have the constant shifting especially if your running the bigger tires.
 

·
Registered
Joined
·
231 Posts
Well I haven't ever run a 12t so I can't really give advise on it but I really like the 13t on mine but that's with stock rear tires. The 12 might be better with the bigger 24in tire. I think if you drop down to the 12 you will need to take a link out of the chain.
 
1 - 5 of 5 Posts
Top