Honda TRX700XX Forum - Club700XX banner
1 - 18 of 18 Posts

· Registered
Joined
·
340 Posts
Porno, I dont run 10s, I have rode two quads back to back with the ITP option and found the 11s to be better (personal choice I suppose). OMF make the best looking bead locks on the planet they make 11s for the 700xx in standard offset or custom in bead lock and reinforced ring type wheel, I think they may do a 10 also for the 700xx.

Overlord
 

· Registered
Joined
·
445 Posts
The only 10" beadlock for a XX is made by Hiper. But as Red-N-Black said you can get just about any wheel made into a beadlock. OMF do it and also a company called Beadlock Specialties so you could probably get them to do a ITP 10" .
 

· Registered
Joined
·
108 Posts
OMF do a 10x8 beadlock rear rim.
They also do a 10x8 with outside reinforcing ring.[/quote

there nice rims, but if you bend it you screwed! hiper rims come with a 1 year unconditional guarantee if it breaks they will replace it and they can make you any size you would like any offset and its the same price as or if not cheaper than omf.....:xx:
 

· Premium Member
Joined
·
4,835 Posts
OMF do a 10x8 beadlock rear rim.
They also do a 10x8 with outside reinforcing ring.[/quote

there nice rims, but if you bend it you screwed! hiper rims come with a 1 year unconditional guarantee if it breaks they will replace it and they can make you any size you would like any offset and its the same price as or if not cheaper than omf.....:xx:
Ok , Give me a price of Hiper 10x8 with a 4/4 offset and outside beadlock please.:D
 

· Registered
Joined
·
268 Posts
I've had the OMFs for over a year they seem to be pretty much indestructable, I ride over big rocky trails at stupid speeds and other than the powder coat on the outer ring having a few scrapes they are perfect.
 

· Registered
Joined
·
211 Posts
I've had the OMFs for over a year they seem to be pretty much indestructable, I ride over big rocky trails at stupid speeds and other than the powder coat on the outer ring having a few scrapes they are perfect.
X2... didnt even bother with the powder coating... You bust one of these and you've earned a trip to the ER.
 

· Premium Member
Joined
·
4,835 Posts
OMF do a 10x8 beadlock rear rim.
They also do a 10x8 with outside reinforcing ring.[/quote

there nice rims, but if you bend it you screwed! hiper rims come with a 1 year unconditional guarantee if it breaks they will replace it and they can make you any size you would like any offset and its the same price as or if not cheaper than omf.....:xx:
He has just posted the price by pm.
The OMF beadlocks are $169.95
The Hiper beadlocks are $269.99.
Tuff call but me thinkin OMF !
 

· Registered
Joined
·
340 Posts
I just got quoted in US dollars by Bones at OMF $229.95 for single bead lock rears and $194.95 for single Bead lock fronts and postage was $525 x 4 wheels in US dollars so I might as well buy them in Aus.

Overlord
 

· Registered
Joined
·
108 Posts
I just got quoted in US dollars by Bones at OMF $229.95 for single bead lock rears and $194.95 for single Bead lock fronts and postage was $525 x 4 wheels in US dollars so I might as well buy them in Aus.

Overlord
yep thats the the same price i received from bones i talked with him about 2 months ago after i trashed my new itp 190 Baja racing rims bent to shit,
i figure for the warranty and the cost per part for replacement at about 30 to 50 bucks after a 1 year unconditional warranty, and the rims are rebuild-able! I'll pay the etra for the hipers better, to have piece of mind knowing that if i hit a big rock at about 50, i don't have to worry about the rim bending cuz it not gonna break! it will just flex.... :lmao:
 

· Premium Member
Joined
·
4,835 Posts
I just got quoted in US dollars by Bones at OMF $229.95 for single bead lock rears and $194.95 for single Bead lock fronts and postage was $525 x 4 wheels in US dollars so I might as well buy them in Aus.

Overlord
Is the $229 ,not the price for the 11" rear ?
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top