|Topic Review (Newest First)|
|10-21-2013 06:07 PM|
And check the last picture in this threads 1st message.
|10-21-2013 05:58 PM|
You mean beside the oem bars? That I don't know, but there's always zip ties! Some members have relocated them under the front nose. And a few places sell riser's with the dash light inserts...
Here's a poor cell phone picture of mine with the Trail tech dash and riser set up.
|10-21-2013 05:07 PM|
and I was thinkin about these bars in a raptor bend if I could somehow get the pod on there
|10-21-2013 04:59 PM|
|036.0||http://www.partzilla.com/parts/detai...HP6-A00ZA.html and is the front fenders or the top part.|
|10-21-2013 04:56 PM|
|036.0||are there any bars that the lights will fit back on or what do you normally do with them if you change the bars|
|10-20-2013 11:52 PM|
|500Rubie||Look closely most people whose bars bend the stem will bend also I have both in my garage|
|10-20-2013 10:09 PM|
|M_Quick||Would have to see picture on plastic tab, there is such a thing as plastic welder. As far as the bars, if you want the dummy light to stay the same. Get oem bars there cheap $51.47, or you can get a used set from someone I'm sure.|
|10-20-2013 09:56 PM|
rolled the 700 this weekend.... need some advice
I rolled my 700 down into a creek during a race this weekend and bent my bars and broke the plastic tab off for the front fender mound under the fender. im not sure what bars I can use that will fit my factory light pod mounted on the bars if anyone knows I appreciate it. also any advice on fixing the mount or just get new front fenders? thanks