|Topic Review (Newest First)|
|04-02-2011 01:38 PM|
|quadmonkey700xx||I also bought the DG nerfs and they fit perfectly. I didnt have problems with installing them. I bought them before I found this forum and long time after you did so maybe they had a problem and corrected it before I got mine. sorry about your problems. your pics have been deleted so I dont know if there is any difference or not|
|03-06-2009 11:41 PM|
Not sure about the skid plate...but that's the reason for the flat bar. If it was mounted with the angle iron bracket that came with the set, there's no way a plate would fit. I have enough slack to where I should be able to tuck the plate under the bracket and then remount. We'll see - skids are my next purchase...along with the RAZRs
|03-04-2009 08:54 PM|
I put my DG nerfs on and had not one problem. The bracket that you corrected fit my 700xx perfect. All the bolts worked also. Sorry you had such a problem.
|03-04-2009 11:14 AM|
|xx-rated||Those look like they mount the same as the Pro Armors. Do they attach at the a-arm mount? The Pro Armor nerfs slide together over the frame though, which seems like a much better design. My Pro Armors didn't fit right either if it makes you feel any better. Will you be able to install a frame skid with that thing in place?|
|03-04-2009 07:44 AM|
|THREESVTS||I have always heard that DG stands for "Don't Get". I have no personal experience, but have heard too many horror stories that I'll never personally experience them myself.|
|03-03-2009 11:22 PM|
If there are any of my brothers that have had the same crap customer service from DG regarding their 700xx nerfs, I post this as my fix for the front tube mounting bracket. Easy 'nough fix... Just had to hack the shipped bracket into 3 pieces, threw away the 'center' piece and welded a steel concrete stake to the two pieces after fitting them in the proper locations at the lower A-Arm bolts (flat bar would work as well).
DG!! F&%$ YOU FOR NOT CALLING BACK !!!