Honda TRX700XX Forum - Club700XX banner

Carb Conversion

9.9K views 56 replies 16 participants last post by  EEHonda  
one main advantage would be the the ignition system... unlimited adjustability and unlimited rpm potential, and a way hotter spark, a ton less wiring for sure. Flywheel modification is $200 or its possible that a XR flywheel may work (gotta look at em side by side)

MSD CDI and Coil is about $400
most carbs are around $500 new

intake configuration could stay in place

44 mm Lectron or 44 FCr or TM would be nice l... maybe a 48 tm or LECTRON


Wiring in the MSD is simple but not for everyone

It will make more power when done
Guess I know what we are doing after the stroker crank.
 
DL lets do a carb setup on my XX and find out if it makes more power. So we will do the new cam, the stroker crank, and a carb setup.
 
I'll give you a good deal on the +3 TB :hey:
 
Thanks for the heads up:lol: I guess then the idle speed set screw can be used inside the tb?
Are you going to a carb setup too? I may have to get mine started this weekend instead of next :lol:
 
Lol I would be happy if it picked up 4hp, I'm not getting my hopes up anymore.
 
Anything that dl thinks will make this pig make some power I'm a fan of lol.
 
Ed I need you to make my xx a lot longer.
 
What is a lot??....
Anything would help. I want to go +6 back but don't think its possible. So maybe +2 or 3 forward and +3 back. Or you can just chop the back off and put a raptor sra with a +6 swing arm lol.
 
Ok the carb setup is official, I just ordered my carb and ill be ordering the rest soon.
 
What did they redesign?
 
I'm J/K because I'm going with a carb setup
 
Sorry been away for a week. I guess no Vortex then:lol:
No Vortex for me. They both will cost about the same price so I went with what DL recommended and that was a carb setup. Smooth is going with the Vortex already so I figured we would go a different route so the forum can get more ideas of what will work on the XX.